409 15/16" Cutting Wheels, 36 Pack

For cutting metal with limited use on wood and plastic. Cut-off
wheels make it easy to cut or slot bolts, screws, sheet metal,
thin wood, and plastic. The cut-off wheel cuts only along its
edge. Do not attempt to sand or cut curved holes with them.

* BIT DIAMETER: 15/16"
* BIT DIAMETER MM: 23,8 mm
* COLOR CODE: Red
* DESCRIPTION: Cut-off Wheel
* MANDREL: 402
* PACK QUANTITY: 36
* THICKNESS: .025"
* MODEL NUMBER:409

Use with mandrel 402
Makes it easy to cut or slot bolts & screws
Use on sheet metal, thin wood & plastic
Cuts only along its edge
.025" thick, 36 per vial

User Tips
The cut-off wheel cuts only along its edge. Do not attempt to
sand or cut curved holes with them.
Secure objects to a stable surface while working.
Hold the tool so that the wheel is at a perpendicular angle to
the material being cut.
Keep a light touch, as the wheel will break under too much
pressure. If chattering occurs, increase speed.
Plastics require very slow speeds, because they tend to melt at
the contact point. Wood requires low speeds also, always
experiment on a scrap first.