420 15/16" Cut-off Wheels, 20 Pack

A 15/16" diameter cutting disc made of a hard abrasive used for
slicing and cutting metal including hardened steel. (.040"
thickness) For slicing and cutting metal including hardened
steel. Cut-off wheels make it easy to cut bolts or screws or make
slots in rusted or stripped bolts and screws for removal with a
screwdriver.

* BIT DIAMETER: 15/16"
* BIT DIAMETER MM: 23,8 mm
* COLOR CODE: Red
* DESCRIPTION: Cut-off Wheel
* PACK QUANTITY: 20
* SHANK: Requires #402 Mandrel
* THICKNESS: .040"
* MODEL NUMBER:420

Use with mandrel 402
Makes it easy to cut or slot bolts & screws
Use on sheet metal, thin wood & plastic
Cuts only along its edge
User Tips
The cut-off wheel cuts only along its edge. Do not attempt to
sand or cut curved holes with them.
Secure objects to a stable surface while working.
Hold the tool so that the wheel is at a perpendicular angle to
the material being cut.
Keep a light touch, as the wheel will break under too much
pressure. If chattering occurs, increase speed.
Plastics require very slow speeds, because they tend to melt at
the contact point. Wood requires low speeds also, always
experiment on a scrap first.