Home  Login 
Navigation: Home » DREMEL
(2)1/2

531 Stainless Steel Brush

Item: DRE531-02
Dimensions: (H x W x L) 0.0 x 0.0 x 0.0
531 Stainless Steel Brush
Stainless steel brushes do not cause "after-rust" when used on
corrosive-resistant materials like pewter, aluminum and stainless
steel.

* BIT DIAMETER INCH: 1/2"
* BIT DIAMETER MM: 12,7 mm
* COLOR CODE: Yellow
* DESCRIPTION: Stainless Steel Brush
* SHANK DIAMETER: 1/8", 3,2 mm
* MODEL NUMBER:531

Ideal for cleaning, deburring and surface-finishing items made
from stainless steel, aluminum, silver, pewter or other white
metals
It is very effective on flat surfaces and in hard-to-reach
places, such as slots
Stainless steel wire bristles

User Tips
Keep a light touch, letting the tips of the brush do the work.
Too much pressure can break the wire bristles.
Before using on a material, allow the tool with brush to run at
operating speed for at least one minute to discharge any loose
wire bristles. Make sure no one stands in front of or in line
with the brush.
Do not use stainless steel brushes in areas where carbon steel
particles may come in contact with the brush (such as steel
workbenches). This prevents rust and contamination.
For the same reason, always store stainless steel brushes apart
from carbon steel brushes.
Do not run in excess of 15,000 rpm. Therefore, do not use with a
Single-Speed MultiPro Rotary Tool or a Heavy-Duty Flex-Shaft Tool
unless you use the #221 Foot Speed Control.