543 Cutting/Shaping Wheel

For cutting and shaping on soft and hard woods, fiberglass,
plastics and laminates (not metal.) This versatile wheel is
coated with tungsten carbide grit for long life. It is coated on
both sides, so it cuts and finishes in one operation.

* BIT DIAMETER: 1-1/4"
* BIT DIAMETER INCH: 1-1/4"
* BIT DIAMETER MM: 31,8 mm
* COLOR CODE: Red
* DESCRIPTION: Cutting/Shaping Wheel
* SHANK DIAMETER: 1/8", 3,2 mm
* THICKNESS: .070", 1.8 mm
* MODEL NUMBER:543

Cuts 33% deeper than former Cutting/Shaping Wheel...up to 1/2"
Ideal for cutting and shaping soft and hard woods, it can also be
used on fiberglass, plastics and laminates
Wheel coated with tungsten carbide grit for long life
Coated on both sides, so it cuts and finishes in one operation

User Tips
Use the edge of the wheel for cutting and slotting.
Use the "face" of the wheel for shaping.
Do not use on metal.
For best results, insert the accessory bit all the way into the
tool and then back it out slightly before tightening down. This
provides plenty of shank for the collet or chuck to hold onto the
bit.