CreateFX Enamel Driftwood Stain ? 1 Oz. Bottle
SKU# 79310

Description:
CreateFX is a new product line that creates detail while
educating, inspiring and driving innovation into schools, clubs,
craft and hobby projects!

CreateFX Enamel Driftwood Stain is easy to apply. Stir well
before applying as stains settle. Apply stain with a fine brush
around detail, seams, recessed and standing detail or apply
evenly over entire surface. Stain will naturally concentrate in
corners and pull up flat surfaces. To blend, thin or remove use
79256 Enamel Thinner. Let dry for 15 minutes, remove excess with
thinner using either a moistened cloth or fine brush. Leave 24
hours for full cure. Recoating before then may result in blending
of colors. Seal with clear coat. Always test surface
compatibility with paint on hidden area or on same type of
surface that is not your finished project.

Thin paint 3 parts paint to 2 parts thinner
Adjust compressor to 20-25 PSI.