9909 Tungsten Carbide Cutter

Tungsten Carbide Cutters are ideal for shaping, smoothing or
removing material from especially hard materials.

* BIT DIAMETER INCH: 1/8"
* BIT DIAMETER MM: 3,2 mm
* COLOR CODE: Teal
* DESCRIPTION: Tungsten Carbide Cutter
* SHANK DIAMETER: 1/8", 3,2 mm
* MODEL NUMBER:9909

Shapes, smooths or grinds especially hard materials including:
hardened steel, stainless steel, cast iron, nonferrous metals,
fired ceramics, plastics and hard woods
A high-speed cutter made of tungsten carbide, the hardest
material next to diamonds

User Tips
Do not use this cutter for drilling holes or for enlarging holes
that are less than twice the diameter of the cutter. The tungsten
carbide surface can easily catch the side of a hole and break
the bit.
For best results, insert the accessory bit all the way into the
tool and then back it out slightly before tightening down. This
provides plenty of shank for the collet or chuck to hold onto the
bit.
Secure objects to a stable surface while working.
Use the sides of the cutter (rather than the tip) for effective
cutting. The tip cuts poorly and can break under pressure.
Use higher speeds for hard woods, slower speeds for metals and
very slow speeds for plastics (to avoid melting at the point of
contact). If chattering occurs, increase speed.